Most engineers think that structured cabling is as easy as installing add-on software. And of course, this thinking is somewhat true. Because in recent years, Ethernet standards and the quality level of manufacturers’ products have been greatly developed and have become sufficiently reliable and good. But the realities of the profession and the ICT solutions Dubai and security systems at work are still in place. Network cabling requires much more attention and care while doing it.
Page Content
Labeling Is One of the Most Important Principles
Before cabling can begin, installers must determine how to label them and mark the cables accordingly. Using a thermal printer to label installed cables can greatly reduce the suspicion and uncertainty that ensues. This method is much more useful than simple marking with tape or colored markers and saves hundreds or thousands of dollars in troubleshooting costs that may occur later. A good tag should include the destination and source of the network cabling and can also be used to add to the tag, which is optional.
Securing Cables Laid on the Roof
Loosening of cables laid on the roof or truss, dripping, or belching of the roof are things that can happen over time and become a nuisance. By planning and considering these cases, as well as the use of cable trays, J hooks, or bridge loops, it is possible to maintain the safety of the cable that is laid on the roof and prevent these problems from occurring.
Use Colored Cables of Different Colors in Cabling
The use of color cables to identify specific systems can show other technicians and IT staff that these cables are for security and surveillance purposes, thus preventing them from being tampered with and their aftermath. Instead, when using a monochrome cable, it can be really difficult to tell which of the many cables available belongs to the camera.
Avoid Creating Spare Cable Loops
One of the most common and useless habits of installers in network cabling is that at the end of the installation, the cable is taken 3 or 5 meters higher. While 1 meter is enough for it. This will make the work dirty and sloppy and also increase the cost.
Take Problems Seriously
These are the problems you will encounter in the structured cabling Dubai process. As long as you are aware of these problems and gather all your senses during the start-up process, you can pass your first test successfully. If you do not succeed, look at each problem separately and check to make sure you have not missed anything.
Source: Rounakcomputers.com
